Executive summary
fable-compiler/Fable.Store falls short of our standard for production because its Testing dimensions are rated Critical, and the project has no automated tests. It scores 53 out of 100, which alone would earn Adequate, but it is rated Weak: a rating can't sit more than one step above its weakest group.
Production Readiness, at 28, is the weakest lens and counts most in the score. The best first step is adding automated tests, worth about 22 points. Recording design decisions is another step, worth about 8 points. Raising Production Readiness to 70 would lift the score to about 68.
We found no critical findings. Most of the 13 serious findings are in Code Health.
The product code is 1,373 lines, about €1,300 to rebuild.
If Production Readiness rose from 28 to 70, the lowest score rated Strong, the score would rise from 53 to about 68.
Rebuild cost: about €1,300 · Estimate
| Cost to rebuild | €440 to €2,200, for 7 to 23 hours of work, under 0.1 person-years for one engineer |
|---|---|
| Difficulty of the problem | Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write. |
| Quality factor | ×0.7 at a score of 53. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it. |
| Size | Very small: 1,373 lines of product code |
| What it is not | Not a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one. |
Top priorities
Diagnosis: what the measurements show together
Architecture — module dependency graph
Architecture: which parts of the code depend on which
| uses → | 1 AstUtils | 2 ElmishStore.Cmd | 3 ElmishStore.Cmd.OfAsync | 4 ElmishStore.Cmd.OfAsyncWith | 5 ElmishStore.Cmd.OfFunc | 6 ElmishStore.Helpers | 7 Fable | 8 ReactStore | 9 SveltePlugins | 10 SvelteStore | 11 LitStore | 12 Store |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 AstUtils | ||||||||||||
| 2 ElmishStore.Cmd | ||||||||||||
| 3 ElmishStore.Cmd.OfAsync | ||||||||||||
| 4 ElmishStore.Cmd.OfAsyncWith | ||||||||||||
| 5 ElmishStore.Cmd.OfFunc | ||||||||||||
| 6 ElmishStore.Helpers | ||||||||||||
| 7 Fable | ||||||||||||
| 8 ReactStore | ||||||||||||
| 9 SveltePlugins | ||||||||||||
| 10 SvelteStore | ||||||||||||
| 11 LitStore | 1 | |||||||||||
| 12 Store | 1 |
11→7 LitStore uses Fable✕
- Connections
- 1 pair of types, where a type in LitStore uses a type in Fable.
- The types involved
LitStore.LitStore→Fable.IStore`1
- Direction
- LitStore uses Fable, so a change to Fable can break LitStore, while a change to LitStore can't break Fable.
- Position
- Below the diagonal: LitStore uses a module listed above it, which is the healthy direction.
12→7 Store uses Fable✕
- Connections
- 1 pair of types, where a type in Store uses a type in Fable.
- The types involved
Store.Store→Fable.IStore`1
- Direction
- Store uses Fable, so a change to Fable can break Store, while a change to Store can't break Fable.
- Position
- Below the diagonal: Store uses a module listed above it, which is the healthy direction.
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
At a glance — Performance
Roadmap
Top priorities: Resolve the 1 No tests found finding(s) in Test Distribution; Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them; Add a CI workflow that builds and runs the test suite on every push/PR.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Resolve the 1 No tests found finding(s) in Test Distribution. | +22.4 pts | Low | Test Distribution |
| Resolve the 3 Prerelease dependency finding(s) in Dependency Hygiene. | +5.2 pts | Low | Dependency Hygiene |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +8.0 pts | Medium | Architecture documentation |
| Add a CI workflow that builds and runs the test suite on every push/PR. | +7.6 pts | Medium | CI/CD gates |
| Resolve the 1 Outdated (npm) finding(s) in Dependency Hygiene. | +1.7 pts | Low | Dependency Hygiene |
| Add a build/run (quick start) section to the root README — the first thing a newcomer needs. | +2.4 pts | Medium | Documentation (README) |
| Start a test surface where your build system looks for one (tests/, test/, spec/, or your ecosystem's test source set) — the separation follows from putting the first tests in the right place. | +1.0 pts | Medium | Folder & project structure |
| Enable measurement for Architecture & structure. | unlocks measurement | Low | Architecture & structure |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| samples/App/src/Dragging/Dragging.fs | 7.8 | Mixed | Code Duplication: Duplicated block (41 lines × 2) |
| samples/App/src/TimeFlies/TimeFlies.fs | 7.8 | Mixed | Code Duplication: Duplicated block (8–9 lines × 2) |
| src/Fable.Store/ElmishStore.fs | 8.5 | Near-clean | Code Duplication: Duplicated block (7 lines × 2) |
| samples/App/src/TodoMVC/TodoMVC.fs | 8.5 | Near-clean | Code Duplication: Duplicated block (51 lines × 2) |
| samples/App/src/Util.fs | 8.5 | Near-clean | Code Duplication: Duplicated block (27 lines × 2) |
| samples/FelizSvelte/src/TimeFliesElmish.fs | 9.5 | Near-clean | IL Efficiency: IL efficiency: 2 authored method(s) exceed the IL budget |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 36 of 36 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); none rely on LLM judgement. Overall confidence is 0.9 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.
What we checked — 36 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 9 of 34 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Watchdog duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 | ✓ deterministic |
| LLM (sampled · advisory) | Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement | — | ◐ LLM · sampled · advisory |
Run transparency — what happened this run
- D11 Test Reliability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test reliability NOT MEASURED: the test run produced no results for any test tier, so no test ever ran and flakiness could not be exercised. The cause could not be attributed, so it is excluded from the score rather than read as an absence of tests.
- D14 License Compliance — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This repository declares package.json, but the licence verdict published here was taken over its NuGet package dependencies. Nothing was read about its npm dependencies' licensing in either direction, and a clean score on this card must not be read as covering them.
- D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-maintainer repository — bus factor is not applicable (4 contributor(s) across 49 commit(s) sampled, automation and bot accounts excluded). One of them holds 88% of the history; the other 3 hold 4% each on average, below the 5% at which there is somebody to hand the work to. That is a single maintainer with drive-by contributors, not a team whose knowledge has concentrated — so the bus factor is not applicable and there is nothing here for the owner to act on.
- D19 Documentation Quality — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. Each ecosystem's manifests (what makes a folder runnable or a published package) need their own proof before D19 judges its units. Until then those folders' READMEs are judged only as documents (boilerplate, structure), never counted as complete.
- D21 Naming Consistency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D21's deterministic naming rules are gated on C# first (docs/plans/deterministic-engine.md, P5): each other language is switched on only after its own concept suite and A/B gate pass. Until then its declarations carry no naming verdict this run — this says nothing about whether its names are consistent.
- D22 Internal API Consistency — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. This repository's source is written only in languages whose packages are published through a manifest, and no manifest in the tree makes a publication act: either there is no package manifest of any ecosystem (no package.json, pyproject.toml, setup.py, gemspec, Cargo.toml, pom.xml, build.gradle, composer.json, pubspec.yaml or mix.exs), or every one present declares in its package manager's own terms that it is not published (an npm package marked "private": true, a Cargo package with publish = false, a pubspec with publish_to: none, a Composer "project", a Poetry project with package-mode = false, or the "Private :: Do Not Upload" classifier). With no publication act there is no intentionally-exposed surface for API consistency to be judged over.
- D24 Comment Value — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check's reader does not cover the language this repository's product is written in, so it had nothing of the product to read. That is a gap in this analyzer's language reach — not a finding about this repository.
- D30 Dependency Vulnerabilities — measured, with a gap in what it reached — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. The solution did not restore on the analyzer's .NET SDK (an SDK/target-framework/restore mismatch, common for an older codebase), so there was no restored dependency graph to scan. 2 of 3 declared ecosystem(s) (npm,osv) WERE scanned and every vulnerability they reported is included in this result; nuget was not, so this dimension's score covers less than the dependency surface this repository declares, and nothing here is evidence that nuget is free of known-vulnerable dependencies.
- D34 Knowledge Freshness — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Too few commits to judge knowledge freshness (49 commit(s) sampled).
- AX6 Interface segregation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over the public interfaces this run's compilations declare, and none was loaded, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- AXR1 Runtime accessibility — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via DevServer (start). the dev server did not expose a crawlable HTTP endpoint in time — no runtime evidence.
- C1 Data Protection — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These personal data controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks personal data controls.
- C2 Access Controls — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These authorization controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks authorization controls.
- C3 Audit Trail — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These audit controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks audit controls.
- C4 Data Retention — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These retention controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks retention controls.
- C5 Data-Subject Rights — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These data-subject rights controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks data-subject rights controls.
- IC1 Incompleteness & stubs — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
- S1 Web-Security Posture — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These web-security controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks web-security controls.
- X1 Async correctness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X12 Unreachable branch — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X13 Undrained process stream — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X14 Bypassable address classification — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X15 Unvalidated length from an untrusted reader — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X16 Unfloored truncation loop — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X17 Uncapped recursion over a caller-supplied document — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X18 Disposal-pattern correctness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X19 Unrestored process-global state — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X2 Cancellation propagation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X21 Side-effecting pattern guard — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X22 Contradicted release guard — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X24 Document value interpolated into markup unescaped — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X25 Inert configuration knob — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X26 Unsynchronised callback handoff — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X29 Per-element action decided by a fixed element — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X3 Exception handling — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X30 Support guard that admits what it rejects — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X32 Type resolved by simple name across every loaded assembly — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X4 Structured logging — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X5 Nullable reference types — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X6 Hand-rolled structured-format parsing — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and Python, JavaScript/TypeScript, Go, Java/Kotlin/Scala, Ruby, PHP, Rust, Swift, Erlang, Elixir and Dart source only, and no C# was loaded and none of those languages was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X7 Silent fallback defaults — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C#, Python, TypeScript/JavaScript, Rust, Go, Java, Kotlin, Scala, PHP, Ruby, Swift and Dart syntax only, and no C#, Python, TypeScript/JavaScript, Rust, Go, Java, Kotlin, Scala, PHP, Ruby, Swift or Dart was loaded for this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
Limitations & what we did not check
Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
- D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
- D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
- D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
- D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
- D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
- D9 Test Distribution: The test-pyramid shape is inferred from project/folder naming and references, with a single test host bucketed per-file by its path tier and content signals — a suite that names tiers unconventionally and gives no per-file signal can still be mis-bucketed.
- D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
- D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
- D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
- D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
- D27 Navigability: Indirection/navigability is structural — it measures hops to follow a call, not whether that indirection buys real flexibility or just ceremony.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
- D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
Dimensions
D1 · Cyclomatic Complexity
0 method(s) exceeded the cyclomatic complexity threshold of 15. A further 1 method(s) were over the threshold but excluded as flat dispatchers (a long switch/match over independent cases: many branches, almost no nesting), the largest being Helper.PrintType at 21 — they are counted neither in the figure above nor in this dimension's score. 1 file carries no cyclomatic complexity row at all for this reason — every one of its over-threshold methods was excluded, so the exclusion is disclosed nowhere in the file itself: src/Fable.SveltePlugins/Plugins.fs (Helper.PrintType at 21). They are named here because the per-file figures other dimensions report are taken BEFORE this exclusion, so such a file can show a high maximum complexity elsewhere in this report and nothing here, with nothing to reconcile the two.
D2 · Cognitive Complexity
0 method(s) exceeded the cognitive complexity threshold of 15.
D3 · God Classes
0 god class(es) detected.
D4 · Code Duplication
7 duplicated block group(s) detected. 6 of the 7 are in trees this repository does not ship — vendored, example/demo, project-template, fixture and benchmark code — and are ranked below the shipped groups rather than excluded from them: the duplication there is real and is still counted in this dimension's score. The dimensions that publish a production-file census leave those trees out of theirs, so this count is deliberately drawn over the wider population.
What to do
- Resolve the 1 Duplicated block (7 lines × 2) finding(s) in Code Duplication — start with ElmishStore.fs. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Duplicated block (51 lines × 2) finding(s) in Code Duplication — start with TodoMVC.fs. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Duplicated block (41 lines × 2) finding(s) in Code Duplication — start with Dragging.fs. — One of this dimension's main actionable groups (1 warning-level).
- Stand up a CI pipeline, then gate Code Duplication in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.
D5 · Coupling
7 projects, 0 dependency cycle(s), 0 unstable depended-on project(s).
D6 · Cohesion (LCOM4)
0 of 5 classes have LCOM4 above 3.
D9 · Test Distribution
No test suite found.
What to do
- Resolve the 1 No tests found finding(s) in Test Distribution. — One of this dimension's main actionable groups (1 recommendation-level).
D12 · Dependency Hygiene
8 outdated, 0 vulnerable, 0 deprecated, 3 prerelease packages. Those are the NuGet packages; this repository's npm dependencies were read too — 7 outdated of 9 package(s) across 3 lockfile(s).
What to do
- Resolve the 3 Prerelease dependency finding(s) in Dependency Hygiene. — One of this dimension's main actionable groups (3 warning-level).
- Resolve the 1 Outdated (npm) finding(s) in Dependency Hygiene. — One of this dimension's main actionable groups (1 recommendation-level).
- Stand up a CI pipeline, then gate Dependency Hygiene in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D14 · License Compliance
0 of 34 packages use a banned license. ★ DEPTH: this repository's MSBuild projects declare 12 direct `PackageReference`(s), and 16 further package(s) were reached beyond them by closing the graph over nuget.org's own nuspec dependency graph — so a banned licence pulled in only by a dependency's OWN dependencies is inside this verdict. A package whose licence nuget.org could not be asked for is not graded, and version ranges are taken at their lower bound, so this is the closure as that graph states it rather than a restored consumer's exact resolution. ★ COVERAGE OF THIS VERDICT: it grades this repository's NuGet package dependencies and nothing else. The repository also declares package.json, and the licences of those dependencies were NOT read by this pass — a gap in this engine's coverage, not a statement about them. So this result says the graded closure carries no banned licence; it does NOT say this repository's licensing is clear.
D15 · Churn × Complexity Hotspots
No churn × complexity hotspots in the window.
D19 · Documentation Quality
1 of 1 documentation facets pass in full. 1 document(s) read across 1 unit(s).
D26 · Project Cohesion
0 of 5 build units (MSBuild) flagged as possibly oversized/incoherent.
D27 · Navigability
86 % of calls cross a namespace and 11 % go through an interface, but 90 % of collaborators are co-located — so a call's collaborators sit together and tracing stays easy. Baseline: small — navigation cost is tolerated.
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
semgrep found no security issues.
D30 · Dependency Vulnerabilities
No known-vulnerable dependencies in the 2 ecosystem(s) that were scanned (npm,osv). Partial dependency scan: 2 of 3 declared ecosystem(s) were scanned (npm,osv), and the findings above are real and complete for them. nuget was not scanned (nuget: the solution did not restore on the analyzer's .NET SDK (an SDK/target-framework/restore mismatch, common for an older codebase), so there was no restored dependency graph to scan), so this is not the whole dependency surface and the result is reported at reduced confidence.
D35 · Change Coupling
No strong hidden change-coupling between production files.
D39 · IL Efficiency
2 of 405 first-party methods have an oversized IL body.
D43 · Malicious Dependencies
No dependency in any ecosystem this repository declares is published as malicious.
D44 · Platform End-of-Life
0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 7 platform declaration(s) and 0 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.
Frontend & cross-cutting dimensions
AX10 · Code composition
What to do
- The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.
AX3 · Project dependency cycles
AX4 · Dependency direction
GD1 · Unfinished & placeholder code
M1 · Documentation (README)
What to do
- Add a build/run (quick start) section to the root README — the first thing a newcomer needs.
- Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
- Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
- Add a README to the 2 of 2 project(s) that lack one — worth up to 2 pts.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
- No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
- Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure
What to do
- Start a test surface where your build system looks for one (tests/, test/, spec/, or your ecosystem's test source set) — the separation follows from putting the first tests in the right place.
P1 · CI/CD gates
- No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.
What to do
- Add a CI workflow that builds and runs the test suite on every push/PR.
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add `semgrep --config=auto` plus gitleaks for committed secrets (F# is not a CodeQL language and has no language-specific SAST engine) — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build. What was searched, so you can tell an absence from a miss: the 0 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
- `samples/App/src/App.fsproj` declares packages, and nothing in the repository keeps them current: no Dependabot or Renovate configuration that schedules updates, and no dependency-review gate on pull requests. A pinned dependency stays at the version it was added at until someone notices — including after an advisory is published against it. Add a `.github/dependabot.yml` with one `package-ecosystem` entry per ecosystem the tree uses (or an enabled `renovate.json`), and gate pull requests with `actions/dependency-review-action`. — samples/App/src/App.fsproj:12
What to do
- Run what this repository's stack ships: `semgrep --config=auto` plus gitleaks for committed secrets (F# is not a CodeQL language and has no language-specific SAST engine) — locally for now, since there is no CI pipeline here yet, and as a step of the first workflow you add so a security regression fails the build instead of landing.
- Enable Dependabot/Renovate or a dependency-review gate.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P6 · Release Hygiene
PF3 · Async & latency hygiene
X20 · Mistyped argument guard
X23 · Unguarded diagnostic materialisation
X27 · Collection changed while being enumerated
X28 · Index access outside its own emptiness guard
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 98% | Exemplary | Solid. |
| Architecture | 99% | Exemplary | Solid. |
| Maturity | 48% | Weak — gated by M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 28% | Weak — gated by D9, P1, P3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 100% | Exemplary | Strongest area. |
| Performance | 100% | Exemplary | Solid. |
Unscored — 1 check(s) recorded observations but carry no score
- SC1 Supply-chain hygiene — 1 observation(s) recorded · Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Not evidenced — 5 control(s) we could not find positive evidence for
- C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- P4 Deployment & Rollback — not evidenced — no deploy/rollback/approval signal in the repo; absence of evidence is not evidence of a manual release
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 78 check(s) not relevant to this codebase
- AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
- AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
- AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
- AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
- AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
- AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
- AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
- AX1 Captive dependencies — Not applicable: this repository's F# imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's; this repository's JavaScript imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX2 Stateful singletons — No container singleton was found, so there is no shared instance for concurrent requests to race on. No F# function in this code takes an ASP.NET Core or Suave HttpContext (a Giraffe, Saturn, Falco, Oxpecker or Suave handler) and no F# class is an ASP.NET Core controller, so no request handler shares module state between request threads. Its F# is compiled by Fable to JavaScript, which runs on one event loop, so no two requests write a shared object at the same instant.
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- AXR1 Runtime accessibility — the dev server did not expose a crawlable HTTP endpoint in time — no runtime evidence This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
- C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- D10 Test Quality — No tests were found in the analyzed repository to assess for quality.
- D11 Test Reliability — Test reliability not measured — no test run produced results
- D16 Bus Factor — single-maintainer repository — bus factor is not applicable
- D17 Explicit Debt — the C# workspace loaded 0 projects, so explicit-debt density could not be measured
- D18 Solution Shape — D18 scores the shape of a C#/VB .NET solution; this repository's .NET projects are all F# (.fsproj), which the C#/VB workspace does not load, so the dimension does not apply.
- D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
- D21 Naming Consistency — Naming consistency is measured on C# and TypeScript only; F# not measured.
- D22 Internal API Consistency — No intentionally-exposed public API to evaluate for consistency.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — D24 reads C# and Visual Basic comments only — this repository's production source is .fs, which was left unread. Not scored: this is a gap in the analyzer, not a verdict about this repository.
- D25 ADR Conformance — no ADRs to check
- D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
- D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
- D34 Knowledge Freshness — too few commits to judge knowledge freshness
- D36 Supply-chain Provenance & Signing — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for.
- D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D7 Architectural Integrity — no checkable ADRs and no dependency cycles — architectural integrity not assessed
- D8 Code Coverage — 1 .NET test project(s) exist on disk but aren't in the .NET solution that was analyzed (e.g. Fable.SvelteStore.fsproj), so coverage couldn't be measured. If this .NET code is part of the product, add those projects to the solution or point Assert at a solution that includes them; if it is a client/compatibility harness beside a product written in another language, nothing is wrong here and this row can be ignored.
- DM1 Domain Modelling — not scored — this repository shows only 1 of the 3 signals this lens looks for (11 value object(s))
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- M4 Documentation accuracy — Not applicable: the 1 current-state document(s) make no claim of a kind M4 checks. 1 claim(s) of kinds M4 does not check were not checked (command argument 1); M4 checks only links and versions and artefact counts.
- P12 CI test-gate honesty — no CI workflow found
- P2 Observability — This repository's F# source (5 module(s), 8 file(s) read) declares no entry point and bootstraps no server, and nothing here deploys a service — it is a library, run inside whatever hosts it, so production observability (structured logging, tracing/metrics, health checks) is N/A. If it grows a binary or a service, the dimension reactivates.
- P7 Outbound HTTP resilience — not measured — the application kind could not be determined for this repo
- P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
- P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (Cobertura — `dotnet test --collect:"XPlat Code Coverage"` with a `coverlet.collector` PackageReference) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
- PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for a BenchmarkDotNet reference in an .fsproj or .vbproj, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
- PF2 Allocation hygiene — Not applicable: allocation awareness is rated where code engineers for it — at least 400 production lines that ship benchmarks or already use allocation-aware idioms (8 or more). This repository's F# code has 825 production line(s), 0 such use(s) and no benchmarks, so there is no allocation work to rate. The card is reward-only: its absence costs nothing.
- S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- X1 Async correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X12 Unreachable branch — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X13 Undrained process stream — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X14 Bypassable address classification — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X15 Unvalidated length from an untrusted reader — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X16 Unfloored truncation loop — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X17 Uncapped recursion over a caller-supplied document — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X18 Disposal-pattern correctness — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X19 Unrestored process-global state — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X21 Side-effecting pattern guard — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X22 Contradicted release guard — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X24 Document value interpolated into markup unescaped — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X25 Inert configuration knob — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X26 Unsynchronised callback handoff — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X29 Per-element action decided by a fixed element — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X30 Support guard that admits what it rejects — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X32 Type resolved by simple name across every loaded assembly — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X6 Hand-rolled structured-format parsing — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X7 Silent fallback defaults — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Serious — 13 finding(s)
- Prerelease dependency: Fable.SvelteStore
- Prerelease dependency: Fable.ReactStore
- Prerelease dependency: React.Lit
- Duplicated block (7 lines × 2) src/Fable.Store/ElmishStore.fs:126
- Duplicated block (51 lines × 2) samples/App/src/TodoMVC/TodoMVC.fs:1
- Duplicated block (41 lines × 2) samples/App/src/Dragging/Dragging.fs:1
- Duplicated block (27 lines × 2) samples/App/src/Util.fs:1
- Duplicated block (12–13 lines × 2) samples/App/src/Dragging/Dragging.fs:45
- Duplicated block (8–9 lines × 2) samples/App/src/TimeFlies/TimeFlies.fs:27
- Duplicated block (6 lines × 2) samples/App/src/TimeFlies/TimeFlies.fs:56
- Tests outside the analyzed solution
- No CI pipeline
- NuGet dependencies are not locked
Minor — 7 finding(s)
- Outdated (npm): js-tokens
- IL efficiency: 2 authored method(s) exceed the IL budget samples/FelizSvelte/src/TimeFliesElmish.fs:153
- No tests found
- No ADRs
- No architecture diagram/doc
- No SAST
- No dependency-update automation samples/App/src/App.fsproj:12
Minor — 14 finding(s)
- Outdated: Fable.Core
- Outdated: FSharp.Core
- Outdated: Fable.Browser.Dom
- Outdated: Fable.Browser.WebStorage
- Outdated: Fable.AST
- Outdated: Fable.SimpleHttp
- Outdated: Feliz.Router
- Outdated: Feliz.Svelte
- Outdated (npm): lit-html
- Outdated (npm): react
- Outdated (npm): react-dom
- Outdated (npm): scheduler
- Outdated (npm): svelte
- Outdated (npm): svelte-adapter
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-edd44f035ade49ab8b2799e9351b1873/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-edd44f035ade49ab8b2799e9351b1873/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt . | 0 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | nuget | — | nuget: not applicable — nuget: the solution did not restore on the analyzer's .NET SDK (an SDK/target-framework/restore mismatch, common for an older codebase), so there was no restored dependency graph to scan | 0 | — |
| D30 · Dependency Vulnerabilities | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update | 0 | artifacts/raw/trivy-fs.json |
| D31 · IaC & Container Security | trivy | — | trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan. | 0 | — |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. | 0 | — |
| D36 · Supply-chain Provenance & Signing | provenance | — | provenance: not applicable — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for. | 0 | — |
| D37 · Vulnerability-disclosure Policy | disclosure | — | disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update | 0 | artifacts/raw/trivy-fs.json |