Executive summary
vbfox/MasterOfFoo falls short of our standard for production, in part because we found no logging, tracing or health checks in the code. It scores 56 out of 100 and is rated Adequate, and all four of its critical findings are security problems.
Production Readiness, at 39, is the weakest lens and counts most in the score. The best first step is logging through a logging library, worth about 10 points. Recording design decisions comes next, worth about 4 points. Raising Production Readiness to 70 would lift the score to about 70.
Two known security holes in the packages the code depends on can be used by attackers. One automatic update takes new releases before a bad one can be spotted. Updating the vulnerable packages and setting a waiting period for automatic updates would close both risks. The check for vulnerable packages switched off needs switching back on.
The product code is 4,883 lines, about €5,500 to rebuild.
If Production Readiness rose from 39 to 70, the lowest score rated Strong, the score would rise from 56 to about 70.
New since the last survey: 1 finding
- Supply-chain Provenance & Signing · REDACTED
Fixed since the last survey: 2 findings
- Code Coverage · Coverage not measured — no coverage collector is wired up
- Supply-chain Provenance & Signing REDACTED
Rebuild cost: about €5,500 · Estimate
| Cost to rebuild | €1,800 to €9,200, for 31 to 97 hours of work, under 0.1 person-years for one engineer |
|---|---|
| Difficulty of the problem | Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write. |
| Quality factor | ×0.8 at a score of 56. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it. |
| Size | Small: 4,883 lines of product code |
| What it is not | Not a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one. |
Top priorities
Diagnosis: what the measurements show together
Architecture — module dependency graph
Architecture: which parts of the code depend on which
| uses → | 1 MasterOfFoo | 2 MasterOfFoo.Build.CompatMatrix | 3 MasterOfFoo.Build.Program | 4 MasterOfFoo.Build.Tasks | 5 MasterOfFoo.Core | 6 MasterOfFoo.Core.PrintfImpl.GenericNumber | 7 MasterOfFoo.FormatSpecifierConstants | 8 MasterOfFoo.MasterOfFooModule | 9 MasterOfFoo.MasterOfFooModule.FormatReflection | 10 MasterOfFoo.Build.CompatMatrix.VariantModule | 11 MasterOfFoo.Build.DockerCompat | 12 MasterOfFoo.Core.Display | 13 MasterOfFoo.Core.PrintfImpl | 14 MasterOfFoo.Core.PrintfImpl.FormatString | 15 MasterOfFoo.FormatFlagsHelpers | 16 MasterOfFoo.Core.PrintfImpl.Basic | 17 MasterOfFoo.Core.PrintfImpl.FloatAndDecimal | 18 MasterOfFoo.Core.PrintfImpl.Integer | 19 MasterOfFoo.Core.PrintfImpl.Padding |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 MasterOfFoo | |||||||||||||||||||
| 2 MasterOfFoo.Build.CompatMatrix | |||||||||||||||||||
| 3 MasterOfFoo.Build.Program | |||||||||||||||||||
| 4 MasterOfFoo.Build.Tasks | |||||||||||||||||||
| 5 MasterOfFoo.Core | |||||||||||||||||||
| 6 MasterOfFoo.Core.PrintfImpl.GenericNumber | |||||||||||||||||||
| 7 MasterOfFoo.FormatSpecifierConstants | |||||||||||||||||||
| 8 MasterOfFoo.MasterOfFooModule | |||||||||||||||||||
| 9 MasterOfFoo.MasterOfFooModule.FormatReflection | |||||||||||||||||||
| 10 MasterOfFoo.Build.CompatMatrix.VariantModule | 1 | ||||||||||||||||||
| 11 MasterOfFoo.Build.DockerCompat | 4 | ||||||||||||||||||
| 12 MasterOfFoo.Core.Display | 1 | ||||||||||||||||||
| 13 MasterOfFoo.Core.PrintfImpl | 5 | 1 | |||||||||||||||||
| 14 MasterOfFoo.Core.PrintfImpl.FormatString | 2 | ||||||||||||||||||
| 15 MasterOfFoo.FormatFlagsHelpers | 1 | ||||||||||||||||||
| 16 MasterOfFoo.Core.PrintfImpl.Basic | 1 | 1 | |||||||||||||||||
| 17 MasterOfFoo.Core.PrintfImpl.FloatAndDecimal | 1 | 1 | |||||||||||||||||
| 18 MasterOfFoo.Core.PrintfImpl.Integer | 1 | 1 | |||||||||||||||||
| 19 MasterOfFoo.Core.PrintfImpl.Padding | 1 | 1 |
10→2 MasterOfFoo.Build.CompatMatrix.VariantModule uses MasterOfFoo.Build.CompatMatrix✕
- Connections
- 1 pair of types, where a type in MasterOfFoo.Build.CompatMatrix.VariantModule uses a type in MasterOfFoo.Build.CompatMatrix.
- The types involved
BlackFox.MasterOfFoo.Build.CompatMatrix.VariantModule.VariantModule→BlackFox.MasterOfFoo.Build.CompatMatrix.Variant
- Direction
- MasterOfFoo.Build.CompatMatrix.VariantModule uses MasterOfFoo.Build.CompatMatrix, so a change to MasterOfFoo.Build.CompatMatrix can break MasterOfFoo.Build.CompatMatrix.VariantModule, while a change to MasterOfFoo.Build.CompatMatrix.VariantModule can't break MasterOfFoo.Build.CompatMatrix.
- Position
- Below the diagonal: MasterOfFoo.Build.CompatMatrix.VariantModule uses a module listed above it, which is the healthy direction.
11→2 MasterOfFoo.Build.DockerCompat uses MasterOfFoo.Build.CompatMatrix✕
- Connections
- 4 pairs of types, where a type in MasterOfFoo.Build.DockerCompat uses a type in MasterOfFoo.Build.CompatMatrix.
- The types involved
BlackFox.MasterOfFoo.Build.DockerCompat.DockerCompat→BlackFox.MasterOfFoo.Build.CompatMatrix.CompatComboBlackFox.MasterOfFoo.Build.DockerCompat.DockerCompat→BlackFox.MasterOfFoo.Build.CompatMatrix.VariantBlackFox.MasterOfFoo.Build.DockerCompat.VariantResult→BlackFox.MasterOfFoo.Build.CompatMatrix.CompatComboBlackFox.MasterOfFoo.Build.DockerCompat.VariantResult→BlackFox.MasterOfFoo.Build.CompatMatrix.Variant
- Direction
- MasterOfFoo.Build.DockerCompat uses MasterOfFoo.Build.CompatMatrix, so a change to MasterOfFoo.Build.CompatMatrix can break MasterOfFoo.Build.DockerCompat, while a change to MasterOfFoo.Build.DockerCompat can't break MasterOfFoo.Build.CompatMatrix.
- Position
- Below the diagonal: MasterOfFoo.Build.DockerCompat uses a module listed above it, which is the healthy direction.
12→5 MasterOfFoo.Core.Display uses MasterOfFoo.Core✕
- Connections
- 1 pair of types, where a type in MasterOfFoo.Core.Display uses a type in MasterOfFoo.Core.
- The types involved
BlackFox.MasterOfFoo.Core.Display.Display→BlackFox.MasterOfFoo.Core.FormatOptions
- Direction
- MasterOfFoo.Core.Display uses MasterOfFoo.Core, so a change to MasterOfFoo.Core can break MasterOfFoo.Core.Display, while a change to MasterOfFoo.Core.Display can't break MasterOfFoo.Core.
- Position
- Below the diagonal: MasterOfFoo.Core.Display uses a module listed above it, which is the healthy direction.
13→1 MasterOfFoo.Core.PrintfImpl uses MasterOfFoo✕
- Connections
- 5 pairs of types, where a type in MasterOfFoo.Core.PrintfImpl uses a type in MasterOfFoo.
- The types involved
BlackFox.MasterOfFoo.Core.PrintfImpl.FormatParser`4→BlackFox.MasterOfFoo.StepBlackFox.MasterOfFoo.Core.PrintfImpl.ObjectPrinter→BlackFox.MasterOfFoo.FormatSpecifierBlackFox.MasterOfFoo.Core.PrintfImpl.PrintfImpl→BlackFox.MasterOfFoo.FormatSpecifierBlackFox.MasterOfFoo.Core.PrintfImpl.Specializations`3→BlackFox.MasterOfFoo.PrintableElementBlackFox.MasterOfFoo.Core.PrintfImpl.Specializations`3→BlackFox.MasterOfFoo.Step
- Direction
- MasterOfFoo.Core.PrintfImpl uses MasterOfFoo, so a change to MasterOfFoo can break MasterOfFoo.Core.PrintfImpl, while a change to MasterOfFoo.Core.PrintfImpl can't break MasterOfFoo.
- Position
- Below the diagonal: MasterOfFoo.Core.PrintfImpl uses a module listed above it, which is the healthy direction.
13→5 MasterOfFoo.Core.PrintfImpl uses MasterOfFoo.Core✕
- Connections
- 1 pair of types, where a type in MasterOfFoo.Core.PrintfImpl uses a type in MasterOfFoo.Core.
- The types involved
BlackFox.MasterOfFoo.Core.PrintfImpl.ObjectPrinter→BlackFox.MasterOfFoo.Core.FormatOptions
- Direction
- MasterOfFoo.Core.PrintfImpl uses MasterOfFoo.Core, so a change to MasterOfFoo.Core can break MasterOfFoo.Core.PrintfImpl, while a change to MasterOfFoo.Core.PrintfImpl can't break MasterOfFoo.Core.
- Position
- Below the diagonal: MasterOfFoo.Core.PrintfImpl uses a module listed above it, which is the healthy direction.
14→1 MasterOfFoo.Core.PrintfImpl.FormatString uses MasterOfFoo✕
- Connections
- 2 pairs of types, where a type in MasterOfFoo.Core.PrintfImpl.FormatString uses a type in MasterOfFoo.
- The types involved
BlackFox.MasterOfFoo.Core.PrintfImpl.FormatString.FormatString→BlackFox.MasterOfFoo.FormatFlagsBlackFox.MasterOfFoo.Core.PrintfImpl.FormatString.FormatString→BlackFox.MasterOfFoo.PrintableElement
- Direction
- MasterOfFoo.Core.PrintfImpl.FormatString uses MasterOfFoo, so a change to MasterOfFoo can break MasterOfFoo.Core.PrintfImpl.FormatString, while a change to MasterOfFoo.Core.PrintfImpl.FormatString can't break MasterOfFoo.
- Position
- Below the diagonal: MasterOfFoo.Core.PrintfImpl.FormatString uses a module listed above it, which is the healthy direction.
15→1 MasterOfFoo.FormatFlagsHelpers uses MasterOfFoo✕
- Connections
- 1 pair of types, where a type in MasterOfFoo.FormatFlagsHelpers uses a type in MasterOfFoo.
- The types involved
BlackFox.MasterOfFoo.FormatFlagsHelpers.FormatFlagsHelpers→BlackFox.MasterOfFoo.FormatFlags
- Direction
- MasterOfFoo.FormatFlagsHelpers uses MasterOfFoo, so a change to MasterOfFoo can break MasterOfFoo.FormatFlagsHelpers, while a change to MasterOfFoo.FormatFlagsHelpers can't break MasterOfFoo.
- Position
- Below the diagonal: MasterOfFoo.FormatFlagsHelpers uses a module listed above it, which is the healthy direction.
16→1 MasterOfFoo.Core.PrintfImpl.Basic uses MasterOfFoo✕
- Connections
- 1 pair of types, where a type in MasterOfFoo.Core.PrintfImpl.Basic uses a type in MasterOfFoo.
- The types involved
BlackFox.MasterOfFoo.Core.PrintfImpl.Basic.Basic→BlackFox.MasterOfFoo.FormatSpecifier
- Direction
- MasterOfFoo.Core.PrintfImpl.Basic uses MasterOfFoo, so a change to MasterOfFoo can break MasterOfFoo.Core.PrintfImpl.Basic, while a change to MasterOfFoo.Core.PrintfImpl.Basic can't break MasterOfFoo.
- Position
- Below the diagonal: MasterOfFoo.Core.PrintfImpl.Basic uses a module listed above it, which is the healthy direction.
16→13 MasterOfFoo.Core.PrintfImpl.Basic uses MasterOfFoo.Core.PrintfImpl✕
- Connections
- 1 pair of types, where a type in MasterOfFoo.Core.PrintfImpl.Basic uses a type in MasterOfFoo.Core.PrintfImpl.
- The types involved
BlackFox.MasterOfFoo.Core.PrintfImpl.Basic.Basic→BlackFox.MasterOfFoo.Core.PrintfImpl.ValueConverter
- Direction
- MasterOfFoo.Core.PrintfImpl.Basic uses MasterOfFoo.Core.PrintfImpl, so a change to MasterOfFoo.Core.PrintfImpl can break MasterOfFoo.Core.PrintfImpl.Basic, while a change to MasterOfFoo.Core.PrintfImpl.Basic can't break MasterOfFoo.Core.PrintfImpl.
- Position
- Below the diagonal: MasterOfFoo.Core.PrintfImpl.Basic uses a module listed above it, which is the healthy direction.
17→1 MasterOfFoo.Core.PrintfImpl.FloatAndDecimal uses MasterOfFoo✕
- Connections
- 1 pair of types, where a type in MasterOfFoo.Core.PrintfImpl.FloatAndDecimal uses a type in MasterOfFoo.
- The types involved
BlackFox.MasterOfFoo.Core.PrintfImpl.FloatAndDecimal.FloatAndDecimal→BlackFox.MasterOfFoo.FormatSpecifier
- Direction
- MasterOfFoo.Core.PrintfImpl.FloatAndDecimal uses MasterOfFoo, so a change to MasterOfFoo can break MasterOfFoo.Core.PrintfImpl.FloatAndDecimal, while a change to MasterOfFoo.Core.PrintfImpl.FloatAndDecimal can't break MasterOfFoo.
- Position
- Below the diagonal: MasterOfFoo.Core.PrintfImpl.FloatAndDecimal uses a module listed above it, which is the healthy direction.
17→13 MasterOfFoo.Core.PrintfImpl.FloatAndDecimal uses MasterOfFoo.Core.PrintfImpl✕
- Connections
- 1 pair of types, where a type in MasterOfFoo.Core.PrintfImpl.FloatAndDecimal uses a type in MasterOfFoo.Core.PrintfImpl.
- The types involved
BlackFox.MasterOfFoo.Core.PrintfImpl.FloatAndDecimal.FloatAndDecimal→BlackFox.MasterOfFoo.Core.PrintfImpl.ValueConverter
- Direction
- MasterOfFoo.Core.PrintfImpl.FloatAndDecimal uses MasterOfFoo.Core.PrintfImpl, so a change to MasterOfFoo.Core.PrintfImpl can break MasterOfFoo.Core.PrintfImpl.FloatAndDecimal, while a change to MasterOfFoo.Core.PrintfImpl.FloatAndDecimal can't break MasterOfFoo.Core.PrintfImpl.
- Position
- Below the diagonal: MasterOfFoo.Core.PrintfImpl.FloatAndDecimal uses a module listed above it, which is the healthy direction.
18→1 MasterOfFoo.Core.PrintfImpl.Integer uses MasterOfFoo✕
- Connections
- 1 pair of types, where a type in MasterOfFoo.Core.PrintfImpl.Integer uses a type in MasterOfFoo.
- The types involved
BlackFox.MasterOfFoo.Core.PrintfImpl.Integer.Integer→BlackFox.MasterOfFoo.FormatSpecifier
- Direction
- MasterOfFoo.Core.PrintfImpl.Integer uses MasterOfFoo, so a change to MasterOfFoo can break MasterOfFoo.Core.PrintfImpl.Integer, while a change to MasterOfFoo.Core.PrintfImpl.Integer can't break MasterOfFoo.
- Position
- Below the diagonal: MasterOfFoo.Core.PrintfImpl.Integer uses a module listed above it, which is the healthy direction.
18→13 MasterOfFoo.Core.PrintfImpl.Integer uses MasterOfFoo.Core.PrintfImpl✕
- Connections
- 1 pair of types, where a type in MasterOfFoo.Core.PrintfImpl.Integer uses a type in MasterOfFoo.Core.PrintfImpl.
- The types involved
BlackFox.MasterOfFoo.Core.PrintfImpl.Integer.Integer→BlackFox.MasterOfFoo.Core.PrintfImpl.ValueConverter
- Direction
- MasterOfFoo.Core.PrintfImpl.Integer uses MasterOfFoo.Core.PrintfImpl, so a change to MasterOfFoo.Core.PrintfImpl can break MasterOfFoo.Core.PrintfImpl.Integer, while a change to MasterOfFoo.Core.PrintfImpl.Integer can't break MasterOfFoo.Core.PrintfImpl.
- Position
- Below the diagonal: MasterOfFoo.Core.PrintfImpl.Integer uses a module listed above it, which is the healthy direction.
19→1 MasterOfFoo.Core.PrintfImpl.Padding uses MasterOfFoo✕
- Connections
- 1 pair of types, where a type in MasterOfFoo.Core.PrintfImpl.Padding uses a type in MasterOfFoo.
- The types involved
BlackFox.MasterOfFoo.Core.PrintfImpl.Padding.Padding→BlackFox.MasterOfFoo.FormatSpecifier
- Direction
- MasterOfFoo.Core.PrintfImpl.Padding uses MasterOfFoo, so a change to MasterOfFoo can break MasterOfFoo.Core.PrintfImpl.Padding, while a change to MasterOfFoo.Core.PrintfImpl.Padding can't break MasterOfFoo.
- Position
- Below the diagonal: MasterOfFoo.Core.PrintfImpl.Padding uses a module listed above it, which is the healthy direction.
19→13 MasterOfFoo.Core.PrintfImpl.Padding uses MasterOfFoo.Core.PrintfImpl✕
- Connections
- 1 pair of types, where a type in MasterOfFoo.Core.PrintfImpl.Padding uses a type in MasterOfFoo.Core.PrintfImpl.
- The types involved
BlackFox.MasterOfFoo.Core.PrintfImpl.Padding.Padding→BlackFox.MasterOfFoo.Core.PrintfImpl.ValueConverter
- Direction
- MasterOfFoo.Core.PrintfImpl.Padding uses MasterOfFoo.Core.PrintfImpl, so a change to MasterOfFoo.Core.PrintfImpl can break MasterOfFoo.Core.PrintfImpl.Padding, while a change to MasterOfFoo.Core.PrintfImpl.Padding can't break MasterOfFoo.Core.PrintfImpl.
- Position
- Below the diagonal: MasterOfFoo.Core.PrintfImpl.Padding uses a module listed above it, which is the healthy direction.
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
At a glance — Performance
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A03:2025 — Software Supply Chain Failures | 6 | High / Critical |
| A05:2025 — Injection | 2 | High / Critical |
Roadmap
Top priorities: Log through `ILogger` (Microsoft.Extensions.Logging, or Serilog with a JSON sink) at meaningful points in the programs and services you run; Resolve the 1 No ADRs found finding(s) in ADR Quality; Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Log through `ILogger` (Microsoft.Extensions.Logging, or Serilog with a JSON sink) at meaningful points in the programs and services you run. | +9.5 pts | Medium | Observability |
| Resolve the 1 No ADRs found finding(s) in ADR Quality. | +4.1 pts | Low | ADR Quality |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +3.2 pts | Medium | Architecture documentation |
| Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it. | +3.0 pts | Medium | Deployment & Rollback |
| Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release. | +3.0 pts | Medium | Release Hygiene |
| Raise allocation-aware density on the hot paths — currently 11 use(s) across 5,235 production line(s) (~2.1/1k). More of the idioms below on the allocation-heavy paths climbs this toward 10. | +2.7 pts | Medium | Allocation hygiene |
| Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite. | +1.8 pts | Medium | Documentation (README) |
| Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. | +0.2 pts | Low | Static Analysis (SAST) |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 7.2 | Mixed | Static Analysis (SAST): High: REDACTED |
| REDACTED | 7.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 7.9 | Mixed | Supply-chain Provenance & Signing: REDACTED |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 33 of 33 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); none rely on LLM judgement. Overall confidence is 0.7 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.
What we checked — 33 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 12 of 23 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Watchdog duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy · checkov | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 · 3.2.533 | ✓ deterministic |
| LLM (sampled · advisory) | Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement | — | ◐ LLM · sampled · advisory |
Run transparency — what happened this run
- D1 Cyclomatic Complexity — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Most of this repository's production source (.fs) had no cyclomatic complexity computed for it: no method bodies were exposed for those file kinds by any language model this pass could load.
- D2 Cognitive Complexity — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Most of this repository's production source (.fs) had no cognitive complexity computed for it: no method bodies were exposed for those file kinds by any language model this pass could load.
- D4 Code Duplication — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Most of this repository's production source (.fs) was not read by duplication detection: no source of those file kinds was exposed to the token comparison by any language model this pass could load.
- D8 Code Coverage — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Coverage NOT MEASURED: `--collect:"XPlat Code Coverage"` names a data collector that ships in the `coverlet.collector` package, and this repository wires up none — no test project references it and no runsettings declares one. The absence of coverage here is therefore not evidence about the suite or about our analyzer environment: without a collector, `--collect` produces nothing even from a suite that builds and passes. Add a `coverlet.collector` PackageReference to the test project(s) (or commit the Cobertura/OpenCover/lcov report your CI produces) and real coverage will be measured. It is excluded from the score rather than counted as a near-zero defect. You can widen what we reach: add the `coverlet.collector` package to the test projects to enable coverage (or commit the Cobertura/OpenCover/lcov report your CI produces).
- D11 Test Reliability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test reliability NOT MEASURED: the test run produced no results for any test tier, so no test ever ran and flakiness could not be exercised. The cause could not be attributed, so it is excluded from the score rather than read as an absence of tests.
- D12 Dependency Hygiene — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. `dotnet list package` did not return usable output (restore or query failed); no outdated/vulnerable/deprecated data to assess. The tool said: `dotnet list package` exited 1 with no output.
- D15 Churn × Complexity Hotspots — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. A hotspot is churn × complexity. Churn was measured (1845 line(s) across the 90-day window), but no complexity could be computed for .fs, which is most of this repository's production code — so every churned file would score as complexity 0 and the hotspot list would be empty no matter how tangled the code is. Not scored — this is a gap in the analysis run, not a finding about this repository.
- D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-contributor repository — bus factor is not applicable (1 contributor(s) across 256 commit(s) sampled, automation and bot accounts excluded). Concentration needs a team to concentrate: with one contributor there is nobody to spread the knowledge to, so there is nothing here for the owner to act on.
- D21 Naming Consistency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D21's deterministic naming rules are gated on C# first (docs/plans/deterministic-engine.md, P5): each other language is switched on only after its own concept suite and A/B gate pass. Until then its declarations carry no naming verdict this run — this says nothing about whether its names are consistent.
- D22 Internal API Consistency — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. This repository's source is written only in languages whose packages are published through a manifest, and no manifest in the tree makes a publication act: either there is no package manifest of any ecosystem (no package.json, pyproject.toml, setup.py, gemspec, Cargo.toml, pom.xml, build.gradle, composer.json, pubspec.yaml or mix.exs), or every one present declares in its package manager's own terms that it is not published (an npm package marked "private": true, a Cargo package with publish = false, a pubspec with publish_to: none, a Composer "project", a Poetry project with package-mode = false, or the "Private :: Do Not Upload" classifier). With no publication act there is no intentionally-exposed surface for API consistency to be judged over.
- D24 Comment Value — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check's reader does not cover the language this repository's product is written in, so it had nothing of the product to read. That is a gap in this analyzer's language reach — not a finding about this repository.
- D27 Navigability — evaluation did not complete — Navigability not included (check did not complete) — excluded from the score.
- D31 IaC & Container Security — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. Compat-tests/Dockerfile.dockerignore carries no `FROM` instruction, so it declares no build stage and every Dockerfile rule this engine owns — the runtime-hardening, key-material, mutable-clone, no-op-shim, build-context, trust-anchor, install-guard, setuid and world-writable-path rules — is outside its own premise there and returned nothing. That silence is deliberate and correct: with no base image there is no image to reason about. It is reported here because it is NOT the same fact as a clean file, and coverage is stated as 1 of 2 Infrastructure-as-Code manifest(s) fully judged rather than as 100%. The vendor scanners (trivy, checkov) do read these files and their findings above stand; only this engine's own stage-keyed rules are absent. No owner action: a build file with no FROM is a legitimate include fragment.
- D39 IL Efficiency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. IL NOT MEASURED: the analyzer's own build of this repository failed for an ENVIRONMENT reason (exit 1) — MSBuild's engine or the CLR gave up, or our image does not carry the SDK band/targeting pack this repository needs. This is OUR limitation, not a defect in the repo, and it is not a statement that this repository fails to build. D18 owns the question of whether this repository builds; it was not answered here.
- AX6 Interface segregation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over the public interfaces this run's compilations declare, and none was loaded, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- AXR1 Runtime accessibility — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via Dockerfile (compat-tests/Dockerfile.dockerignore). docker build failed (exit 1) — #1 transferring dockerfile: 764B done #1 DONE 0.0s Dockerfile.dockerignore:9 -------------------- 7 | # allow-list: a child can only be re-included if none of its parent directories 8 | # are excluded). 9 | >>> * 10 | !compat-tests 11 | !artifacts -------------------- ERROR: failed to solve: dockerfile parse error on line 9: unknown instruction: *; runtime evidence skipped.
- C1 Data Protection — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These personal data controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks personal data controls.
- C2 Access Controls — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These authorization controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks authorization controls.
- C3 Audit Trail — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These audit controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks audit controls.
- C4 Data Retention — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These retention controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks retention controls.
- C5 Data-Subject Rights — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These data-subject rights controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks data-subject rights controls.
- IC1 Incompleteness & stubs — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- M4 Documentation accuracy — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. M4 checks only the claim kinds adjudicated at or above 95 % precision: links and versions (PREREGISTRATION version 9), and artefact counts an order of magnitude off. Paths, command arguments, installs, environment variables, settings, projects, packages, routes, cd targets, infrastructure products and removed modules are read but not checked, and none of them is reported or counted.
- P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
- P8 Schema migrations — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads EF Core usage in C# and the schema tooling its file scan recognises only, and no .NET project was loaded, and this repository's language is not one the scan models, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- S1 Web-Security Posture — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These web-security controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks web-security controls.
- X1 Async correctness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X12 Unreachable branch — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X13 Undrained process stream — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X14 Bypassable address classification — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X15 Unvalidated length from an untrusted reader — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X16 Unfloored truncation loop — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X17 Uncapped recursion over a caller-supplied document — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X18 Disposal-pattern correctness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X19 Unrestored process-global state — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X2 Cancellation propagation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X21 Side-effecting pattern guard — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X22 Contradicted release guard — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X24 Document value interpolated into markup unescaped — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X25 Inert configuration knob — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X26 Unsynchronised callback handoff — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X29 Per-element action decided by a fixed element — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X3 Exception handling — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X30 Support guard that admits what it rejects — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X32 Type resolved by simple name across every loaded assembly — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X4 Structured logging — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X5 Nullable reference types — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X6 Hand-rolled structured-format parsing — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and Python, JavaScript/TypeScript, Go, Java/Kotlin/Scala, Ruby, PHP, Rust, Swift, Erlang, Elixir and Dart source only, and no C# was loaded and none of those languages was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X7 Silent fallback defaults — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C#, Python, TypeScript/JavaScript, Rust, Go, Java, Kotlin, Scala, PHP, Ruby, Swift and Dart syntax only, and no C#, Python, TypeScript/JavaScript, Rust, Go, Java, Kotlin, Scala, PHP, Ruby, Swift or Dart was loaded for this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
Limitations & what we did not check
Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
- D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
- D20 ADR Quality: ADR quality is an LLM read of the decision records present — it cannot know about decisions made and never recorded, and its verdict is sampled and advisory.
- D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
- D31 IaC & Container Security: IaC scanning checks Dockerfiles/Terraform/Kubernetes against best-practice rules — it cannot see the live cloud account, runtime configuration, or drift between the committed config and what is actually deployed.
- D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
- D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
- P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
- P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
Dimensions
D5 · Coupling
5 projects, 0 dependency cycle(s), 0 unstable depended-on project(s).
D6 · Cohesion (LCOM4)
0 of 3 classes have LCOM4 above 3.
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D14 · License Compliance
0 of 64 packages use a banned license. ★ DEPTH: this repository's MSBuild projects declare 3 direct `PackageReference`(s), and 62 further package(s) were reached beyond them by closing the graph over nuget.org's own nuspec dependency graph — so a banned licence pulled in only by a dependency's OWN dependencies is inside this verdict. A package whose licence nuget.org could not be asked for is not graded, and version ranges are taken at their lower bound, so this is the closure as that graph states it rather than a restored consumer's exact resolution.
D20 · ADR Quality
No architecture decision records were found.
What to do
- Resolve the 1 No ADRs found finding(s) in ADR Quality. — One of this dimension's main actionable groups (1 recommendation-level).
D26 · Project Cohesion
0 of 2 build units (MSBuild) flagged as possibly oversized/incoherent.
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
2 finding(s): 0 critical, 1 high, 1 medium, 0 low. semgrep hit a parse error in 1 file(s) — `compat-tests/entrypoint.sh` (line 9) — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them.
What to do
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
D30 · Dependency Vulnerabilities
2 finding(s): 0 critical, 2 high, 0 medium, 0 low.
What to do
- Resolve the 2 High CVE finding(s) in Dependency Vulnerabilities. — One of this dimension's main actionable groups (2 issue-level).
D31 · IaC & Container Security
trivy and checkov found no infrastructure-as-code or container misconfigurations.
What to do
- Maintain IaC & Container Security — already on the Gold path. — No findings, and enforcement is at this dimension's ceiling.
D34 · Knowledge Freshness
Every significant source file has living knowledge — recently and meaningfully worked. Counted over 11 of the 21 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
D35 · Change Coupling
No strong hidden change-coupling between production files.
D36 · Supply-chain Provenance & Signing
1/4 supply-chain integrity signals present (provenance, signing, SBOM, pinned actions).
What to do
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 recommendation-level).
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 recommendation-level).
D43 · Malicious Dependencies
No dependency in any ecosystem this repository declares is published as malicious.
D44 · Platform End-of-Life
0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 5 platform declaration(s) and 0 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.
Frontend & cross-cutting dimensions
AX10 · Code composition
What to do
- The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.
AX3 · Project dependency cycles
AX4 · Dependency direction
GD1 · Unfinished & placeholder code
M1 · Documentation (README)
What to do
- Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
- Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
M3 · Folder & project structure
M4 · Documentation accuracy
P1 · CI/CD gates
P2 · Observability
- No logging call was found in the 21 F# production file(s) this check read across 4 module(s). Each was searched for its ecosystem's logging libraries (F#: Microsoft.Extensions.Logging (ILogger), Serilog, NLog, log4net, Logary) and for a call on a receiver named `log`/`logger` (or ending in `Logger`/`_logger`) with a level verb. It cannot see logging through a repo-local wrapper named otherwise, or in source it did not read — this is 'no logging found by this walk', not a verdict that nothing here logs. If it is right, production issues will be hard to diagnose.
What to do
- Log through `ILogger` (Microsoft.Extensions.Logging, or Serilog with a JSON sink) at meaningful points in the programs and services you run.
- Consider OpenTelemetry tracing/metrics (OpenTelemetry.Extensions.Hosting with the ASP.NET Core instrumentation) and a health-check endpoint (ASP.NET Core's MapHealthChecks, or a /health route in your Giraffe/Suave app) for operability.
P3 · Security & performance tooling
- `NoWarn` silences NU1901, NU1902, NU1903, NU1904 — NuGet's vulnerability-audit warnings for low, moderate, high and critical advisories. Suppressed advisories are still shipped; they are only invisible in the build log. Remove these codes from NoWarn and address or explicitly accept each advisory instead. — src/Directory.Build.props:18
- No static application security testing detected. For this repository's stack, add `semgrep --config=auto` plus gitleaks for committed secrets (F# is not a CodeQL language and has no language-specific SAST engine) as a CI step. What was searched, so you can tell an absence from a miss: the 3745 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner. — REDACTED:6
- `REDACTED` schedules updates, but no `package-ecosystem` entry covers `nuget`, which this tree depends on — so those dependencies get no update pull requests and no advisory pressure, however complete the dep-scan credit looks. Add the missing entry to the `updates:` list. — REDACTED:2
What to do
- Add a SAST step to CI running what this repository's stack ships: `semgrep --config=auto` plus gitleaks for committed secrets (F# is not a CodeQL language and has no language-specific SAST engine) — so a security regression fails the build instead of landing.
- Dependabot is configured but does not watch `nuget` — add that `package-ecosystem` entry to REDACTED so those dependencies get the same automatic update and advisory pressure as the ones it already covers.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback
What to do
- Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.
P6 · Release Hygiene
- No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)
What to do
- Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.
PF2 · Allocation hygiene
What to do
- Raise allocation-aware density on the hot paths — currently 11 use(s) across 5,235 production line(s) (~2.1/1k). More of the idioms below on the allocation-heavy paths climbs this toward 10.
- F#: on hot paths, work through Span/Memory (AsSpan/AsMemory) instead of copies, rent buffers from ArrayPool, make small records, unions and tuples [<Struct>]/struct (…) and options voption, mark lambda parameters of inline functions [<InlineIfLambda>], use valueTask for completions that are usually synchronous, and presize ResizeArray/StringBuilder.
X20 · Mistyped argument guard
X23 · Unguarded diagnostic materialisation
X27 · Collection changed while being enumerated
X28 · Index access outside its own emptiness guard
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Architecture | 100% | Exemplary | Strongest area. |
| Maturity | 66% | Adequate — gated by M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 39% | Weak — gated by P2, P3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 77% | Adequate — gated by D36 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Performance | 71% | Strong | Solid. |
Unscored — 3 check(s) recorded observations but carry no score
- P12 CI test-gate honesty — 1 observation(s) recorded · Reported, not scored — this card publishes what the CI gate does with the test inventory rather than grading it. The findings above are its output.
- SC1 Supply-chain hygiene — 1 observation(s) recorded · Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X10 Duplicated predicate — 6 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
Not evidenced — 4 control(s) we could not find positive evidence for
- C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 80 check(s) not relevant to this codebase
- AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
- AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
- AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
- AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
- AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
- AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
- AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
- AX1 Captive dependencies — Not applicable: this repository's F# imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX2 Stateful singletons — No container singleton was found, so there is no shared instance for concurrent requests to race on. No F# function in this code takes an ASP.NET Core or Suave HttpContext (a Giraffe, Saturn, Falco, Oxpecker or Suave handler) and no F# class is an ASP.NET Core controller, so no request handler shares module state between request threads.
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- AXR1 Runtime accessibility — docker build failed (exit 1) — #1 transferring dockerfile: 764B done #1 DONE 0.0s Dockerfile.dockerignore:9 -------------------- 7 | # allow-list: a child can only be re-included if none of its parent directories 8 | # are excluded). 9 | >>> * 10 | !compat-tests 11 | !artifacts -------------------- ERROR: failed to solve: dockerfile parse error on line 9: unknown instruction: *; runtime evidence skipped This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
- C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- D1 Cyclomatic Complexity — cyclomatic complexity not measured — .fs exposed no member bodies
- D10 Test Quality — ~574 lines of test source are present (.fs) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- D11 Test Reliability — Test reliability not measured — no test run produced results
- D12 Dependency Hygiene — Dependency hygiene not measured
- D15 Churn × Complexity Hotspots — complexity unreadable for .fs — churn × complexity hotspots could not be measured
- D16 Bus Factor — single-contributor repository — bus factor is not applicable
- D17 Explicit Debt — the C# workspace loaded 0 projects, so explicit-debt density could not be measured
- D18 Solution Shape — D18 scores the shape of a C#/VB .NET solution; this repository's .NET projects are all F# (.fsproj), which the C#/VB workspace does not load, so the dimension does not apply.
- D19 Documentation Quality — No runnable or published unit to look for an example in, and no multi-project root README to look for a map in; the other documentation kinds are withheld (see the gaps), so documentation quality is not applicable here.
- D2 Cognitive Complexity — cognitive complexity not measured — .fs exposed no member bodies
- D21 Naming Consistency — Naming consistency is measured on C# and TypeScript only; F# not measured.
- D22 Internal API Consistency — No intentionally-exposed public API to evaluate for consistency.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — D24 reads C#, Visual Basic, TypeScript and JavaScript comments only — this repository's production source is .fs, which was left unread. Not scored: this is a gap in the analyzer, not a verdict about this repository.
- D25 ADR Conformance — no ADRs to check
- D27 Navigability — Navigability not included (check did not complete)
- D3 God Classes — Most of this repository's production source (.fs) was not read by god-class detection, so class size was not assessed for the languages that are the product — whatever else this pass did read is not this repository's class size. Not scored — this is a gap in the analyzer, not a verdict about this repository.
- D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
- D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
- D39 IL Efficiency — IL not measured — the analyzer's build of the target did not succeed
- D4 Code Duplication — Duplication not measured — .fs not exposed to the token comparison
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D7 Architectural Integrity — no checkable ADRs and no dependency cycles — architectural integrity not assessed
- D8 Code Coverage — Coverage not measured — no coverage collector is wired up
- D9 Test Distribution — Test source is present (.fs) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so its unit/integration/BDD/E2E split couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- DM1 Domain Modelling — not scored — this repository shows only 1 of the 3 signals this lens looks for (4 value object(s))
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- P7 Outbound HTTP resilience — not measured — the application kind could not be determined for this repo
- P8 Schema migrations — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (Cobertura — `dotnet test --collect:"XPlat Code Coverage"` with a `coverlet.collector` PackageReference) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
- PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for a BenchmarkDotNet reference in an .fsproj or .vbproj, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
- PF3 Async & latency hygiene — Not applicable: this repository declares no async functions, so there is no asynchronous code for a blocking call to stall.
- S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- X1 Async correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X12 Unreachable branch — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X13 Undrained process stream — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X14 Bypassable address classification — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X15 Unvalidated length from an untrusted reader — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X16 Unfloored truncation loop — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X17 Uncapped recursion over a caller-supplied document — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X18 Disposal-pattern correctness — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X19 Unrestored process-global state — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X21 Side-effecting pattern guard — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X22 Contradicted release guard — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X24 Document value interpolated into markup unescaped — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X25 Inert configuration knob — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X26 Unsynchronised callback handoff — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X29 Per-element action decided by a fixed element — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X30 Support guard that admits what it rejects — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X32 Type resolved by simple name across every loaded assembly — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X6 Hand-rolled structured-format parsing — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X7 Silent fallback defaults — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 4 finding(s)
- REDACTED
- REDACTED
- REDACTED
- NuGet vulnerability audit suppressed via NoWarn src/Directory.Build.props:18
Serious — 5 finding(s)
- REDACTED
- REDACTED
- Test suite runs only after the merge
- No structured logging
- NuGet dependencies are not locked
Minor — 14 finding(s)
- Duplicated predicate src/BlackFox.MasterOfFoo/Core/printf.fs:870
- Duplicated predicate src/BlackFox.MasterOfFoo/Core/printf.fs:640
- Duplicated predicate src/BlackFox.MasterOfFoo/Core/printf.fs:636
- Duplicated predicate src/BlackFox.MasterOfFoo/Core/printf.fs:900
- Duplicated predicate src/BlackFox.MasterOfFoo/Core/FormatSpecification.fs:54
- Duplicated predicate src/BlackFox.MasterOfFoo/Core/printf.fs:399
- No ADRs found
- REDACTED
- REDACTED
- REDACTED
- No ADRs
- No SAST REDACTED:6
- Dependabot does not watch nuget REDACTED:2
- No changelog
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-3166abc010674dfc88a901dd5a56ba78/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-3166abc010674dfc88a901dd5a56ba78/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt . | 2 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | dotnet | — | dotnet list src/MasterOfFoo.sln package --vulnerable --include-transitive --format json | 2 | artifacts/raw/dotnet-vulnerable.json |
| D31 · IaC & Container Security | trivy | — | trivy config --format json --quiet . | 0 | artifacts/raw/trivy-config.json |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. | 0 | — |
| D37 · Vulnerability-disclosure Policy | disclosure | — | disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | osv-scanner | — | osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm . /tmp/codehealth-osv-sbom-194eba85835e4ed8ac6195fc88378b90 | 0 | artifacts/raw/osv-scanner.json |